Ford 2015 EXPEDITION Owner'S Manual Download Page 35

Page: 35 / 564

CHILD SAFETY LOCKS

When these locks are set, the rear doors cannot be opened from the
inside.

The childproof locks are located on the rear edge of
each rear door and must be set separately for each
door.

Move the lock control up to engage the childproof
lock.

Move it down to disengage the lock.

Child Safety

2015 Expedition

(exd)

Owners Guide gf, 1st Printing, July 2014
USA

(fus)

Summary of Contents for 2015 EXPEDITION





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 EXPEDITION

Reviews:

Ford 2015 EXPEDITION, Owner'S Manual, Page: 35 / 564

Search results

Summary of Contents for 2015 EXPEDITION

Reviews: