Home
/
Ford
/
2015 EXPEDITION
/
Owner'S Manual

Ford 2015 EXPEDITION, Owner'S Manual, Page: 371 / 564

Share

Page: 371 / 564

Ford 2015 EXPEDITION Owner'S Manual Download Page 371

AM/FM/CD/SYNC/SIRIUS

WARNING:

Driving while distracted can result in loss of vehicle

control, crash and injury. We strongly recommend that you use

extreme caution when using any device that may take your focus off
the road. Your primary responsibility is the safe operation of your
vehicle. We recommend against the use of any hand-held device while
driving and encourage the use of voice-operated systems when possible.
Make sure you are aware of all applicable local laws that may affect the
use of electronic devices while driving.

Note:

Some features, such as Sirius satellite radio, may not be available

in your location. Check with an authorized dealer.

A.

Display screen:

Shows audio and SYNC information.

370

Audio System

2015 Expedition

(exd)

Owners Guide gf, 1st Printing, July 2014
USA

(fus)

«
...
369
370
371
372
373
...
»

Summary of Contents for 2015 EXPEDITION





















































































































































































































































































































































































































































































































































































Reviews:

No comments