Ford 2013 F-650 Owner'S Manual Download

Page: 228 / 378

Checking the Fluid Level

See the

Scheduled Maintenance

chapter for rear axle lubricant level

check intervals.
1. Park the vehicle on level ground.
2. Set the parking brake and shift into position

(automatic

transmission), or first gear (manual transmission). Turn the engine
off.

3. Clean any dirt from around the rear axle filler plug.
4. Remove the filler plug and inspect the lubricant level. It should be at

the bottom of the filler plug opening.

5. Add lubricant, if necessary, through the filler plug opening.
6. Clean and install the filler plug securely.

Changing the Fluid

See the

Scheduled Maintenance

chapter for rear axle lubricant change

intervals.
1. Drain the rear axle while the lubricant is warm.
2. Park the vehicle on level ground.
3. Set the parking brake and shift into position

(automatic

transmission), or first gear (manual transmission). Turn the engine
off.

4. Clean any dirt from around the rear axle filler and drain plugs.
5. Remove the filler and drain plugs. Drain the lubricant into a suitable

container. Dispose of all used automotive fluids in a responsible
manner following your local authorized standards.

6. Clean and install the drain plug securely.
7. Add lubricant through the filler plug opening.
8. Clean and install the filler plug securely.

Maintenance

227

2013 F-650/750

(f67)

Owners Guide gf, 2nd Printing, March 2013
USA

(fus)

Summary of Contents for 2013 F-650



























































































































































































































































































































































































Search results

Summary of Contents for 2013 F-650

Reviews:

Related manuals for 2013 F-650

Brands by name

Popular brands

Ford 2013 F-650, Owner'S Manual

Search results

Summary of Contents for 2013 F-650

Reviews:

Related manuals for 2013 F-650

Brands by name

Popular brands