Ford 2013 F-650 Page 82 Owner'S Manual Download

Page: 82 / 378

Phone:

Press this button to access the phone features of the SYNC®

system. See the

SYNC®

chapter for more information.

MENU:

Press this button to access different audio system features.

•

If your vehicle is equipped with satellite radio, you can access
different menus by pressing

OK.

•

Set the time by pressing

MENU

until

SET HOURS

SET

MINUTES

appears and using the arrow buttons to adjust the time.

•

Set the strongest stations on the radio frequency by pressing

MENU

until

AUTOSET

appears.

AUTOSET

does not override your original

presets.

•

RBDS

displays text transmitted by certain radio stations and

searches for music categories. To search for music categories, turn on
RBDS (by using the

SEEK

buttons when

RBDS ON/OFF

appears).

Press the up and down arrow buttons to scroll through categories,
then use the

SEEK

buttons to begin the search.

•

SPEEDVOL

(speed compensated volume) allows you to adjust radio

volume to compensate for noise levels when vehicle speed increases.

•

Track/Folder

is only available on MP3 files when in CD mode. In

track mode, pressing the

SEEK

arrows allows you to scroll through

all the tracks on the disc. In folder mode, pressing the

SEEK

arrows

allows you to scroll through all the tracks within the selected folder.
Press the

FOLDER

buttons to access other folders.

•

COMPRESS

(Compression) is only available in CD and MP3 modes.

Switching compression on brings the soft and loud passages together
for a more consistent listening level. Use the

SEEK

buttons and up

and down arrow buttons to switch it on and off.

AUX:

Press this button to access the media features of the SYNC®

system. See the

SYNC®

chapter for more information.

SEEK:

•

In radio mode, press and release these buttons to go to the next (or
previous) preset radio station or disc track.

•

In CD and MP3 modes, press these buttons to select the next (or
previous) track, or press and hold to advance (or reverse) within the
same track.

Play, Pause and OK:

•

Play and Pause allow you to play or pause a track when listening to a
CD.

•

allows you to confirm commands with phone and media features

of the SYNC system. See the

SYNC®

chapter for more information.

SHUFFLE:

Play music on the selected CD or MP3 folder in random

order.

Audio System

2013 F-650/750

(f67)

Owners Guide gf, 2nd Printing, March 2013
USA

(fus)

Summary of Contents for 2013 F-650



























































































































































































































































































































































































Search results

Summary of Contents for 2013 F-650

Reviews:

Related manuals for 2013 F-650

Brands by name

Popular brands

Ford 2013 F-650, Owner'S Manual

Search results

Summary of Contents for 2013 F-650

Reviews:

Related manuals for 2013 F-650

Brands by name

Popular brands