Ford 2013 F-650 Page 98 Owner'S Manual Download

Page: 98 / 378

Air-Ride Seat

Recline:

Lift the handle to adjust the angle of the seat back.

Power lumbar:

•

Press the top of the forward control to inflate the lower lumbar
support.

•

Press the bottom of the forward control to deflate the lower lumbar
support.

•

Press the top of the rear control to inflate the upper lumbar support.

•

Press the bottom of the rear control to deflate the upper lumbar
support.

Seat height adjuster:

•

Pull the control up to raise the seat.

•

Push the control down to lower the seat.

Seat adjuster:

•

Lift the bar up to move the seat forward or backward.

•

Release the bar to lock the seat in position.

Chugger option:

Dampens road vibrations and allows the seat to

move with the driver when unlocked.

•

To unlock, sit in the seat and slide the tab away to the right.

•

To lock, sit in the seat and slide the tab to the left.

Seats

2013 F-650/750

(f67)

Owners Guide gf, 2nd Printing, March 2013
USA

(fus)

Summary of Contents for 2013 F-650



























































































































































































































































































































































































Search results

Summary of Contents for 2013 F-650

Reviews:

Related manuals for 2013 F-650

Brands by name

Popular brands

Ford 2013 F-650, Owner'S Manual

Search results

Summary of Contents for 2013 F-650

Reviews:

Related manuals for 2013 F-650

Brands by name

Popular brands