Ford 2013 F-650 Page 21 Owner'S Manual Download

Page: 21 / 378

Front Suspension

Springs

Inspect for leaves that may be:

•

missing

•

broken

•

shifted

•

in contact with (or nearly contacting) a tire,

rim, brake drum, frame or body component.

Note:

Never apply grease to spring pads.

Spring Mounts

Inspect the following for cracks, breaks, wear,
damage and tightness:

•

spring hangers

•

bolts

•

bushings

•

axle mounting bolts

•

nuts.

Shock Absorbers

Inspect for:

•

cracks

•

leaks

•

missing or broken bolts or bushings.

Front Brakes

Hoses

•

Inspect for cracked, worn or frayed hoses.

•

Verify all couplings are secured.

Brake Chambers

Verify:

•

there are no cracks or dents

•

they are securely mounted.

Slack Adjusters

Inspect for broken, loose or missing parts.

Note:

The angle between the push rod and

adjuster arm should be approximately 90° when
the brakes are applied. When pulled by hand,
the push rod should not move more than
approximately one inch (2.5 cm).

Drums

Verify:

•

there are no cracks, dents, holes, and no loose

or missing bolts

•

the brake linings are not worn, dangerously

thin or contaminated by lubricant.

Vehicle Inspection Guide

2013 F-650/750

(f67)

Owners Guide gf, 2nd Printing, March 2013
USA

(fus)

Summary of Contents for 2013 F-650



























































































































































































































































































































































































Search results

Summary of Contents for 2013 F-650

Reviews:

Related manuals for 2013 F-650

Brands by name

Popular brands

Ford 2013 F-650, Owner'S Manual

Search results

Summary of Contents for 2013 F-650

Reviews:

Related manuals for 2013 F-650

Brands by name

Popular brands