manualshive.com logo in svg

Ford 2012 Mustang, Owner'S Manual

The Ford 2012 Mustang Quick Reference Manual is a comprehensive guide for Mustang owners, providing all the essential information needed to operate and maintain this iconic vehicle. This manual can be easily accessed and downloaded for free from our website, manualshive.com, ensuring convenience and accessibility for every Mustang enthusiast.

Share
Download
background image

Your vehicle is very sophisticated and built with multiple complex
performance systems. Every manufacturer develops these systems using
different specifications and performance features. That’s why it’s
important to rely upon your dealership to properly diagnose and repair
your vehicle.

Ford Motor Company has recommended maintenance intervals for
various parts and component systems based upon engineering testing.
Ford Motor Company relies upon this testing to determine the most
appropriate mileage for replacement of oils and fluids to protect your
vehicle at the lowest overall cost to you and recommends against
maintenance schedules that deviate from the scheduled maintenance
information.

Ford strongly recommends the use of genuine Ford replacement parts.
Parts other than Ford, Motorcraft

威

or Ford-authorized remanufactured

parts that are used for maintenance replacement or for the service of
components affecting emission control must be equivalent to genuine
Ford Motor Company parts in performance and durability. It is the
owner’s responsibility to determine the equivalency of such parts. Please
consult your

Warranty Guide

for complete warranty information.

Chemicals or additives not approved by Ford are not required for factory
recommended maintenance. In fact, Ford Motor Company recommends
against the use of such additive products unless specifically
recommended by Ford for a particular application.

Oils, fluids and flushing

In many cases, fluid discoloration is a normal operating characteristic
and, by itself, does not necessarily indicate a concern or that the fluid
needs to be changed. However, discolored fluids that also show signs of
overheating and/or foreign material contamination should be inspected
immediately by a qualified expert such as the factory-trained technicians
at your dealership. Your vehicle’s oils and fluids should be changed at the
specified intervals or in conjunction with a repair. Flushing is a viable
way to change fluid for many vehicle sub-systems during scheduled
maintenance. It is critical that systems are flushed only with new fluid
that is the same as that required to fill and operate the system, or using
a Ford-approved flushing chemical.

Scheduled Maintenance

328

2012 05+ Mustang

(197)

Owners Guide, 3rd Printing
USA

(fus)

Summary of Contents for 2012 Mustang































































































































































































































































































































































Reviews:

No comments

Related manuals for 2012 Mustang

iDataLink ADS-ALCA Install Manuals preview
ADS-ALCA
Brand: iDataLink Pages: 30
OEM Tools 22505 Operating Instructions And Parts Manual preview
22505
Brand: OEM Tools Pages: 4
Alpine eX-10 Owner'S Manual preview
eX-10
Brand: Alpine Pages: 69
Allen Sports S302 Instructions preview
S302
Brand: Allen Sports Pages: 2
Caraudio-Systems v.LOGiC Intelligent Solution V5-NTG46 Manual preview
v.LOGiC Intelligent Solution V5-NTG46
Brand: Caraudio-Systems Pages: 18
Sumitomo Dunlop L.D02.C.M Installation Manual preview
Dunlop L.D02.C.M
Brand: Sumitomo Pages: 22
Omix-Ada 11704.05 Owner'S Manual preview
11704.05
Brand: Omix-Ada Pages: 6
Toyota SUPRA 1987 Electrical Wiring Diagram preview
SUPRA 1987
Brand: Toyota Pages: 165
ConWys AG 21500598C VW Fitting Instructions Manual preview
21500598C VW
Brand: ConWys AG Pages: 16
Thule 953000 Instructions Manual preview
953000
Brand: Thule Pages: 8
TIS TISPLUS User Manual preview
TISPLUS
Brand: TIS Pages: 6
Proxel EPS-DUAL Installation Instructions & User Manual preview
EPS-DUAL
Brand: Proxel Pages: 16
Curt Group Retrac 207700 Installation Manual preview
Retrac 207700
Brand: Curt Group Pages: 4
PIE FRDN/PC-POD2 Application And Installation Instructions preview
FRDN/PC-POD2
Brand: PIE Pages: 2
Fass STK-5500 Installation Manual preview
STK-5500
Brand: Fass Pages: 20
VanEssa mobilcamping 00001668 Installation Manual preview
00001668
Brand: VanEssa mobilcamping Pages: 12
Toyota 1991 CAMRY Body Section Repair Manual preview
1991 CAMRY Body Section
Brand: Toyota Pages: 111
Chevrolet 2003 Monte Carlo Owner'S Manual preview
2003 Monte Carlo
Brand: Chevrolet Pages: 386

Brands by name

Popular brands

Load more brands