manualshive.com logo in svg

Ford 2012 Mustang, Owner'S Manual

The Ford 2012 Mustang Quick Reference Manual is a comprehensive guide for Mustang owners, providing all the essential information needed to operate and maintain this iconic vehicle. This manual can be easily accessed and downloaded for free from our website, manualshive.com, ensuring convenience and accessibility for every Mustang enthusiast.

Share
Download
background image

WARNING:

Do not park, idle, or drive your vehicle in dry grass

or other dry ground cover. The emission system heats up the

engine compartment and exhaust system, which can start a fire.

WARNING:

Do not start your vehicle in a closed garage or in

other enclosed areas. Exhaust fumes can be toxic. Always open

the garage door before you start the engine. See

Guarding against

exhaust fumes

in this chapter for more instructions.

WARNING:

If you smell exhaust fumes inside your vehicle, have

your dealer inspect your vehicle immediately. Do not drive if you

smell exhaust fumes.

Important safety precautions

A computer system controls the engine’s idle revolutions per minute
(RPM). When the engine starts, the idle RPM runs higher than normal in
order to warm the engine. If the engine idle speed does not slow down
automatically, have the vehicle checked. Do not allow the vehicle to idle
for more than 10 minutes at the higher engine RPM.

Before starting the vehicle:

1. Make sure all vehicle occupants have buckled their safety belts. For
more information on safety belts and their proper usage, refer to the

Seating and Safety Restraints

chapter.

2. Make sure the headlamps and vehicle accessories are off.

Driving

207

2012 05+ Mustang

(197)

Owners Guide, 3rd Printing
USA

(fus)

Summary of Contents for 2012 Mustang































































































































































































































































































































































Reviews:

No comments

Related manuals for 2012 Mustang

CAMPARK R10 Manual preview
R10
Brand: CAMPARK Pages: 20
Falcon 1990 Installation Instructions And Specifications preview
1990
Brand: Falcon Pages: 8
FormFit HD 23A 07 Installation Instructions preview
HD 23A 07
Brand: FormFit Pages: 4
Bestop WrapAround Windjammer Installation Instructions Manual preview
WrapAround Windjammer
Brand: Bestop Pages: 7
Dometic Heki 2 Installation And Operating Manual preview
Heki 2
Brand: Dometic Pages: 158
Menabo JUZA Fitting Instructions Manual preview
JUZA
Brand: Menabo Pages: 12
Over Armour Offroad TX-STAMP-4-FC04 Instructions For Installation And Care preview
TX-STAMP-4-FC04
Brand: Over Armour Offroad Pages: 9
Kia CADENZA 2017 Features & Functions Manual preview
CADENZA 2017
Brand: Kia Pages: 58
Ratio Power box Manual preview
Power box
Brand: Ratio Pages: 12
Horn Tools PHRRF002 Mounting Instructions preview
PHRRF002
Brand: Horn Tools Pages: 8
Mercedes-Benz Vito Taxi 2011 Operation Manual preview
Vito Taxi 2011
Brand: Mercedes-Benz Pages: 10
BraunAbility Rampvan Maintenance And Service Manual preview
Rampvan
Brand: BraunAbility Pages: 46
Westin 32-1660 Instructions preview
32-1660
Brand: Westin Pages: 3
XTC RZR-SW-USB-2B Manual preview
RZR-SW-USB-2B
Brand: XTC Pages: 2
GMC 2008 Acadia Getting To Know Manual preview
2008 Acadia
Brand: GMC Pages: 24
HAUL MASTER 96198 Instructions preview
96198
Brand: HAUL MASTER Pages: 4
SoundMax SM-DVR77FHD Instruction Manual preview
SM-DVR77FHD
Brand: SoundMax Pages: 20
Curt Group Retrac 207700 Installation Manual preview
Retrac 207700
Brand: Curt Group Pages: 4

Brands by name

Popular brands

Load more brands