manualshive.com logo in svg

Ford 2012 Mustang, Owner'S Manual

The Ford 2012 Mustang Quick Reference Manual is a comprehensive guide for Mustang owners, providing all the essential information needed to operate and maintain this iconic vehicle. This manual can be easily accessed and downloaded for free from our website, manualshive.com, ensuring convenience and accessibility for every Mustang enthusiast.

Share
Download
background image

If you cannot move the gearshift lever out of P (Park) with ignition in
the on position and the brake pedal pressed:

1. Apply the parking brake.

2. Using a flat head screwdriver or
similar tool, remove the cap.

3. Locate the access hole at the
front of the area under the cover.

4. Insert the screwdriver or similar
tool into the hole and press and
hold the lever forward while pulling
the gearshift lever out of the P
(Park) position and into the N
(Neutral) position.

5. Reinstall the cap.

6. Start the vehicle.

If it is necessary to use the above procedure to move the gearshift lever,
it is possible that a fuse has blown or the vehicle’s brake lamps are not
operating properly. Refer to

Fuses and relays

in the

Roadside

Emergencies

chapter.

WARNING:

Do not drive your vehicle until you verify that the

brakelamps are working.

WARNING:

When doing this procedure, you will be taking the

vehicle out of park which means the vehicle can roll freely. To

avoid unwanted vehicle movement, always fully set the parking brake
prior to doing this procedure. Use wheel chocks if appropriate.

WARNING:

If the parking brake is fully released, but the brake

warning lamp remains illuminated, the brakes may not be

working properly. Contact your authorized dealer as soon as possible to
have the system serviced immediately.

Driving

220

2012 05+ Mustang

(197)

Owners Guide, 3rd Printing
USA

(fus)

Summary of Contents for 2012 Mustang































































































































































































































































































































































Reviews:

No comments

Related manuals for 2012 Mustang

AC Schnitzer F40 Fitting Instructions Manual preview
F40
Brand: AC Schnitzer Pages: 16
Paxton Automotive Novi Owner'S Installation Manual preview
Novi
Brand: Paxton Automotive Pages: 85
Thule 1489 Instructions Manual preview
1489
Brand: Thule Pages: 8
Farad BARS PR25 - 2 Quick Start Manual preview
BARS PR25 - 2
Brand: Farad Pages: 8
Whispbar K934W Fitting Instructions Manual preview
K934W
Brand: Whispbar Pages: 15
Quadratec 12057.0261 Installation Manual preview
12057.0261
Brand: Quadratec Pages: 12
M7 SPEED AGS-R2 Manual preview
AGS-R2
Brand: M7 SPEED Pages: 6
Chevrolet Malibu 2014 Owner'S Manual preview
Malibu 2014
Brand: Chevrolet Pages: 428
Velleman CARS4500 User Manual preview
CARS4500
Brand: Velleman Pages: 12
Audi 2011 A3 Sportback Pricing And Specification Manual preview
2011 A3 Sportback
Brand: Audi Pages: 29
Prorack WHISPBAR S53 Fitting Instructions For Basic Carrier preview
WHISPBAR S53
Brand: Prorack Pages: 10
ULTIMATE SPEED 91449 Operation And Safety Notes preview
91449
Brand: ULTIMATE SPEED Pages: 34
Ford Escape 2022 Owner'S Manual preview
Escape 2022
Brand: Ford Pages: 585
EUFAB 11512 Manual preview
11512
Brand: EUFAB Pages: 4
Calix M5T 204 Assembly Instructions preview
M5T 204
Brand: Calix Pages: 4
iQOS CCU01 Safety Warnings And Instructions preview
CCU01
Brand: iQOS Pages: 4
Panavise Indash 75114-296 Installation Instructions preview
Indash 75114-296
Brand: Panavise Pages: 2
Rally Armor IMF63 Installation Instruction preview
IMF63
Brand: Rally Armor Pages: 4

Brands by name

Popular brands

Load more brands