manualshive.com logo in svg

Ford 2010 MKX, Owner'S Manual

The Ford 2010 MKX product is accompanied by a comprehensive Quick Reference Manual that provides users with invaluable information and instructions. This essential manual is available for download, absolutely free, from our website. Enhance your MKX experience by accessing this user-friendly manual at manualshive.com.

Share
Download
background image

ABS warning lamp

The ABS lamp in the instrument
cluster momentarily illuminates
when the ignition is turned on. If
the light does not illuminate during
start up, remains on or flashes, the
ABS may be disabled and may need to be serviced.

Even when the ABS is disabled,
normal braking is still effective. If
your BRAKE warning lamp
illuminates with the parking brake
released, have your brake system
serviced immediately by an authorized dealer.

Parking brake

Apply the parking brake whenever
the vehicle is parked. To set the
parking brake, press the parking
brake pedal down until the pedal
stops.

The BRAKE warning lamp in the
instrument cluster illuminates and
remains illuminated (when the
ignition is turned on) until the
parking brake is released.

WARNING:

Always set the parking brake fully and make sure

that the gearshift is securely latched in P (Park).

The parking brake is not recommended to stop a moving vehicle.
However, if the normal brakes fail, the parking brake can be used to stop
your vehicle in an emergency. Since the parking brake applies only the
rear brakes, the vehicle’s stopping distance will increase greatly and the
handling of your vehicle will be adversely affected.

ABS

P

!

BRAKE

P

!

BRAKE

Driving

206

2010 MKX

(mkx)

Owners Guide, 3rd Printing
USA

(fus)

Summary of Contents for 2010 MKX


























































































































































































































































































































Reviews:

No comments

Related manuals for 2010 MKX

Lancia Delta Owner'S Handbook Manual preview
Delta
Brand: Lancia Pages: 276
T-Tech TT100 User Manual preview
TT100
Brand: T-Tech Pages: 38
Jeep Wrangler 2011 Owner'S Manual preview
Wrangler 2011
Brand: Jeep Pages: 603
Jeep Patriot 2011 User Manual preview
Patriot 2011
Brand: Jeep Pages: 80
iArmor IA-N179 Manual preview
IA-N179
Brand: iArmor Pages: 6
Rightline Gear Car Top Duffle Bag Setup Manual preview
Car Top Duffle Bag
Brand: Rightline Gear Pages: 2
PEUGEOT 407 2010 Manual preview
407 2010
Brand: PEUGEOT Pages: 249
Jeep Cherokee 2000 Service Manual preview
Cherokee 2000
Brand: Jeep Pages: 1528
METRON PC05T User Manual preview
PC05T
Brand: METRON Pages: 4
Audi Audi 80 1987 Workshop Manual preview
Audi 80 1987
Brand: Audi Pages: 63
Mazda 0000-8L-G03A Installation Instructions preview
0000-8L-G03A
Brand: Mazda Pages: 3
BMW FXX ATM Emulator User And Installation Manual preview
FXX ATM Emulator
Brand: BMW Pages: 5
Cadillac ESCALADE ESV 2005 Owner'S Manual preview
ESCALADE ESV 2005
Brand: Cadillac Pages: 482
curt CM-58967 Installation Manual preview
CM-58967
Brand: curt Pages: 4
Waeco Perfect Fit MBM120 Installation Instructions preview
Perfect Fit MBM120
Brand: Waeco Pages: 3
Or-Fab HD Bumper Installation Instructions preview
HD Bumper
Brand: Or-Fab Pages: 4
Rugged Ridge 53701.52 Installation Manual preview
53701.52
Brand: Rugged Ridge Pages: 5
Rugged Ridge 13551.33 Manual preview
13551.33
Brand: Rugged Ridge Pages: 3

Brands by name

Popular brands

Load more brands