manualshive.com logo in svg

Ford 2010 MKX, Owner'S Manual

The Ford 2010 MKX product is accompanied by a comprehensive Quick Reference Manual that provides users with invaluable information and instructions. This essential manual is available for download, absolutely free, from our website. Enhance your MKX experience by accessing this user-friendly manual at manualshive.com.

Share
Download
background image

SNOW TIRES AND CHAINS

WARNING:

Snow tires must be the same size, load index, speed

rating as those originally provided by Ford. Use of any tire or

wheel not recommended by Ford can affect the safety and
performance of your vehicle, which could result in an increased risk of
loss of vehicle control, vehicle rollover, personal injury and death.
Additionally, the use of non-recommended tires and wheels could
cause steering, suspension, axle or transfer case/power transfer unit
failure.

The tires on your vehicle have all-weather treads to provide traction in
rain and snow. However, in some climates, you may need to use snow
tires and chains. If you need to use chains, it is recommended that only
cable chains are used with steel wheels (of the same size and
specifications) as chains may chip aluminum wheels.

Note:

The suspension insulation and bumpers will help prevent vehicle

damage. Do not remove these components from your vehicle when using
snow tires and chains.

Follow these guidelines when using snow tires and chains:

•

If possible, avoid fully loading your vehicle.

•

Install cable chains only on the front wheels.

•

Use only cable chains on 18 inch wheels with P245/60R18 tires.

•

Do not use tire chains, cables or optional traction devices on 20 inch
or 22 inch wheels and tires.

•

Drive cautiously. If you hear the cable chains rub or bang against your
vehicle, stop and retighten the cable chains. If this does not work,
remove the cable chains to prevent damage to your vehicle.

•

Remove the tire cable chains when they are no longer needed. Do not
use tire cable chains on dry roads.

VEHICLE LOADING – WITH AND WITHOUT A TRAILER

This section will guide you in the proper loading of your vehicle and/or
trailer, to keep your loaded vehicle weight within its design rating
capability, with or without a trailer. Properly loading your vehicle will
provide maximum return of vehicle design performance. Before loading
your vehicle, familiarize yourself with the following terms for determining
your vehicle’s weight ratings, with or without a trailer, from the vehicle’s
Tire Label or Safety Compliance Certification Label:

Tires, Wheels and Loading

188

2010 MKX

(mkx)

Owners Guide, 3rd Printing
USA

(fus)

Summary of Contents for 2010 MKX


























































































































































































































































































































Reviews:

No comments

Related manuals for 2010 MKX

Back View RV-250 User Manual preview
RV-250
Brand: Back View Pages: 168
Wagan 2591 User Manual preview
2591
Brand: Wagan Pages: 12
Trailboss HD86 Fitting Instructions preview
HD86
Brand: Trailboss Pages: 5
Metra Electronics 95-6556 Installation Instructions preview
95-6556
Brand: Metra Electronics Pages: 4
Rostra REARSIGHT OnStar 250-8822 Installation Instructions preview
REARSIGHT OnStar 250-8822
Brand: Rostra Pages: 2
Chevrolet 1999 Malibu Owner'S Manual preview
1999 Malibu
Brand: Chevrolet Pages: 344
Prorack K692 Fitting Instructions Manual preview
K692
Brand: Prorack Pages: 15
Renault ALASKAN 2017 Driver'S Handbook Manual preview
ALASKAN 2017
Brand: Renault Pages: 340
cam PFF Series Operating Manual preview
PFF Series
Brand: cam Pages: 28
cam 40103 AL Mounting Instructions preview
40103 AL
Brand: cam Pages: 6
KEKO K162 Installation Instructions Manual preview
K162
Brand: KEKO Pages: 13
Road Armor Stealth 4191F Series Install Instructions preview
Stealth 4191F Series
Brand: Road Armor Pages: 5
Waeco Magic Watch MWE-850-4DSM Installation And Operating Manual preview
Magic Watch MWE-850-4DSM
Brand: Waeco Pages: 204
Columbia THERAPEDIC 2000 Instructions For Use Manual preview
THERAPEDIC 2000
Brand: Columbia Pages: 14
KLAUS Multiparking trendvario6X00 Service Manual preview
trendvario6X00
Brand: KLAUS Multiparking Pages: 72
Ford 1999 Crown Victoria Owner'S Manual preview
1999 Crown Victoria
Brand: Ford Pages: 208
Motoalliance Denali MA11737 Manual preview
Denali MA11737
Brand: Motoalliance Pages: 4
Buick 1995 Roadmaster Manual preview
1995 Roadmaster
Brand: Buick Pages: 340

Brands by name

Popular brands

Load more brands