manualshive.com logo in svg

Ford 2010 MKX, Owner'S Manual

The Ford 2010 MKX product is accompanied by a comprehensive Quick Reference Manual that provides users with invaluable information and instructions. This essential manual is available for download, absolutely free, from our website. Enhance your MKX experience by accessing this user-friendly manual at manualshive.com.

Share
Download
background image

•

DELETE ALL SONGS:

Press OK to delete all song’s from the

system’s memory. The display will read ARE YOU SURE ? Press OK to
confirm deletion of all saved songs and the display will read ALL
DELETED.

Note:

If there are no songs presently saved, the display will read NO

SONGS.

•

ENABLE ALERTS / DISABLE ALERTS:

Press OK to enable/disable

the satellite alert status which alerts you when your selected songs are
playing on a satellite radio channel. (The system default is disabled.)
SONG ALERTS ENABLED/DISABLED will appear in the display. The
menu listing will display the opposite state. For example, if you have
chosen to enable the song alerts, the menu listing will read DISABLE
as the alerts are currently on, so your other option is to turn them off.

Satellite radio is available only with a valid SIRIUS

威

radio

subscription. Check with your authorized dealer for availability.

RBDS ON/OFF:

Press

/

to turn RBDS ON or OFF.

Program Type:

If RBDS is ON, press

/

to find the desired

program type, then use

SEEK

or SCAN to search for FM radio

stations broadcasting the desired program type.

RBDS (Radio Broadcast Data System):

Available in FM mode only.

Allows you to search RBDS-equipped stations for certain categories of
music or announcements. With RBDS ON, you may select from: Info
(Information), Alert, Test, Religious, R&B, Classical, Jazz, Oldies,
Country, Top 40, Soft and Rock as described under

Program Type

above. When the desired category appears in the display, press

SEEK, SEEK

to initiate the search. The system will cycle

through the FM frequency band searching for stations broadcasting the
selected category type. If the desired program type is not found after
searching the frequency band three times, the search will stop. The
announcement categories are as follows:

•

Alert:

Searches for RBDS stations actively broadcasting important

messages relating to weather or government emergencies.

•

Test:

Searches for RBDS stations actively broadcasting a test message.

Autoset:

Allows you to set the strongest local radio stations without

losing your original manually set preset stations for AM/FM1/FM2.
Use

/

to turn on/off.

When the six strongest stations are filled, the station stored in preset 1
will begin playing. If there are less than six strong stations, the system
will store the last one in the remaining presets.

Entertainment Systems

28

2010 MKX

(mkx)

Owners Guide, 3rd Printing
USA

(fus)

Summary of Contents for 2010 MKX


























































































































































































































































































































Reviews:

No comments

Related manuals for 2010 MKX

Back View RV-250 User Manual preview
RV-250
Brand: Back View Pages: 168
Cadillac SRX 2012 Instructions preview
SRX 2012
Brand: Cadillac Pages: 3
Cadillac Escalade 2021 Features Manual preview
Escalade 2021
Brand: Cadillac Pages: 12
Cadillac CTS 2008 Navigation System Owner'S Manual preview
CTS 2008
Brand: Cadillac Pages: 106
Cadillac CTS 2008 Customer Convenience/Personalization Manual preview
CTS 2008
Brand: Cadillac Pages: 20
Cadillac ATS 2014 Convenience/Personalization Manual preview
ATS 2014
Brand: Cadillac Pages: 20
Cadillac ATS 2013 Owner'S Manual preview
ATS 2013
Brand: Cadillac Pages: 326
Cadillac CTS 2012 Quick Manual preview
CTS 2012
Brand: Cadillac Pages: 28
Cadillac ESCALADE - BROCHURE 2009 Owner'S Manual preview
ESCALADE - BROCHURE 2009
Brand: Cadillac Pages: 602
Cadillac ESCALADE ESV 2004 Owner'S Manual preview
ESCALADE ESV 2004
Brand: Cadillac Pages: 20
Cadillac ESCALADE EXT 2005 Owner'S Manual preview
ESCALADE EXT 2005
Brand: Cadillac Pages: 460
Cadillac CT6 SUPER CRUISE 2018 Convenience/Personalization Manual preview
CT6 SUPER CRUISE 2018
Brand: Cadillac Pages: 8
Cadillac XT6 2023 Manual preview
XT6 2023
Brand: Cadillac Pages: 20
Cadillac LYRIQ 2023 Owner'S Manual preview
LYRIQ 2023
Brand: Cadillac Pages: 337
VEAP SHIELD UNITED FT Series Mounting Instruction preview
FT Series
Brand: VEAP SHIELD UNITED Pages: 3
BrandMotion 1009-6503 Installation Instructions Manual preview
1009-6503
Brand: BrandMotion Pages: 8
FormFit HD 23A 07 Installation Instructions preview
HD 23A 07
Brand: FormFit Pages: 4
Vauxhall Meriva 2014 Infotainment Manual preview
Meriva 2014
Brand: Vauxhall Pages: 131

Brands by name

Popular brands

Load more brands