manualshive.com logo in svg

Ford 2010 MKX, Owner'S Manual

The Ford 2010 MKX product is accompanied by a comprehensive Quick Reference Manual that provides users with invaluable information and instructions. This essential manual is available for download, absolutely free, from our website. Enhance your MKX experience by accessing this user-friendly manual at manualshive.com.

Share
Download
background image

WARNING:

Always transport children 12 years old and under in

the back seat and always properly use appropriate child

restraints.

The front passenger sensing system can automatically turn off the front
passenger airbag and passenger seat-mounted side airbag. The system is
designed to help protect small (child size) occupants from frontal airbag
deployments when they are seated or restrained in the front passenger
seat contrary to proper child-seating or restraint usage
recommendations. Even with this technology, parents are

STRONGLY

encouraged to always properly restrain children in the rear seat. The
sensor also turns off the passenger front airbag and passenger
seat-mounted side airbag when the passenger seat is empty and the
safety belt is unbuckled.

Front safety belt usage sensors

The front safety belt usage sensors detect whether or not the driver and
front outboard passenger safety belts are fastened. This information
allows your Personal Safety System to tailor the airbag deployment and
safety belt pretensioner activation depending upon safety belt usage.

Front safety belt pretensioners

The safety belt pretensioners at the front outboard seating positions are
designed to tighten the safety belts firmly against the occupant’s body
during frontal collisions, and in rollover and side collisions when the
Safety Canopy

威

is activated. This helps increase the effectiveness of the

safety belts. In frontal collisions, the safety belt pretensioners can be
activated alone or, if the collision is of sufficient severity, together with
the front airbags.

Front safety belt energy management retractors

The front outboard safety belt energy management retractors allow
webbing to be pulled out of the retractor in a gradual and controlled
manner in response to the occupant’s forward momentum. This helps
reduce the risk of force-related injuries to the occupant’s chest by
limiting the load on the occupant. Refer to

Energy management feature

— front outboard

section in this chapter.

Determining if the Personal Safety System is operational

The Personal Safety System uses a warning light in the instrument
cluster or a back-up tone to indicate the condition of the system. Refer
to the

Warning lights and chimes

section in the

Instrument Cluster

chapter. Routine maintenance of the Personal Safety System is not
required.

Seating and Safety Restraints

121

2010 MKX

(mkx)

Owners Guide, 3rd Printing
USA

(fus)

Summary of Contents for 2010 MKX


























































































































































































































































































































Reviews:

No comments

Related manuals for 2010 MKX

AA Products KX405 Instruction Manual preview
KX405
Brand: AA Products Pages: 8
Daihatsu S85 Wiring Diagrams preview
S85
Brand: Daihatsu Pages: 41
Daihatsu S85 Workshop Manual preview
S85
Brand: Daihatsu Pages: 268
Jeep GRAND CHEROKEE 2023 Information Manual preview
GRAND CHEROKEE 2023
Brand: Jeep Pages: 108
Kargo Master 40131 Installation Manual preview
40131
Brand: Kargo Master Pages: 5
ABL Wallbox eM4 Single Installation Manual preview
Wallbox eM4 Single
Brand: ABL Pages: 68
FormFit HD 23A 07 Installation Instructions preview
HD 23A 07
Brand: FormFit Pages: 4
Safe Fleet PRIME DESIGN VRR-NV200 Manual preview
PRIME DESIGN VRR-NV200
Brand: Safe Fleet Pages: 12
Würth 071554055 User Instructions preview
071554055
Brand: Würth Pages: 36
Honda 2010 Civic Sedan Owner'S Manual preview
2010 Civic Sedan
Brand: Honda Pages: 390
Honda 2010 Pilot Technology Reference Manual preview
2010 Pilot
Brand: Honda Pages: 20
Kia 2009 Rio Series Owner'S Manual preview
2009 Rio Series
Brand: Kia Pages: 219
STARLANE POLE STAR PRO Installation And Instruction Manual preview
POLE STAR PRO
Brand: STARLANE Pages: 24
tams elektronik FCS-4 Manual preview
FCS-4
Brand: tams elektronik Pages: 19
v.link VL2-DVD900 Manual preview
VL2-DVD900
Brand: v.link Pages: 19
Enduro EM203 User Manual preview
EM203
Brand: Enduro Pages: 52
Oldsmobile 1994 Bravada Owner'S Manual preview
1994 Bravada
Brand: Oldsmobile Pages: 248
RBO IT FITS RBO1018 Product Manual preview
IT FITS RBO1018
Brand: RBO Pages: 36

Brands by name

Popular brands

Load more brands