Ford 2010 Milan Hybrid Owner'S Manual Download Page 207

Page: 207 / 326

AUTOMATIC TRANSMISSION OPERATION

Understanding the gearshift positions of the 6–speed automatic
transmission equipped with a 2.5L I4 engine (if equipped)

P (Park)

This position locks the transmission and prevents the front wheels from
turning.

To put your vehicle in gear:

•

Depress the brake pedal

•

Move the gearshift lever into the desired gear

To put your vehicle in P (Park):

•

Come to a complete stop

•

Move the gearshift lever and securely latch it in P (Park)

WARNING:

Always set the parking brake fully and make sure

the gearshift is latched in P (Park). Turn the ignition to the off

position and remove the key whenever you leave your vehicle.

R (Reverse)

With the gearshift lever in R (Reverse), the vehicle will move backward.
Always come to a complete stop before shifting into and out of R
(Reverse).

2010 Milan

(mln)

Owners Guide, 1st Printing
USA

(fus)

Driving

207

Summary of Contents for 2010 Milan Hybrid







































































































































































































































































































































Search results

Summary of Contents for 2010 Milan Hybrid

Reviews:

Ford 2010 Milan Hybrid, Owner'S Manual, Page: 207 / 326

Search results

Summary of Contents for 2010 Milan Hybrid

Reviews: