Forch 5323 108 10, Manual

Page: 36 / 120

Activate magnet
Place the drilling machine on the base.
Press the RED switch (“I”) to activate the magnet.
Switching the motor on and off
The motor unit can only be switched on when the magnet is activated. To switch the motor ON press the
GREEN button (“–”). To switch the motor OFF press the RED button (“O”).
Maintenance and care
Caution! First remove the mains plug from the socket. The magnetic drill stand must be kept clean and
should be cleaned regularly. To avoid accidents, the drill stand, connection cables, protective conductor
connections, plugs and sockets, switches and automatic start lock must be checked regularly for damage.
Note: Also observe the maintenance and care instructions for the attached electric tools. Damaged ma-
chine parts are only to be replaced by original spare parts. All sliding surfaces of the guide must be oiled
quarterly, after cleaning. Should side play occur, this can be compensated by adjusting the grub screws.
For optimum cooling, the ventilation slots of the drill drive must be kept free of dirt and dust. Please note
that electrical equipment may only be repaired, maintained and checked by qualified electricians (in ac-
cordance with VBG4), as improper repairs can cause serious danger to the user!
Symbol Term, meaning Description
Read the documents Make sure that you read and understood the enclosed
information such as the operating instructions and the
general safety instructions.
Wear hearing protection Use hearing protection while working with the device.
Wear eye protection Use eye protection (safety goggles) while working with
the device.
Danger/Warning/
Caution Please note the information in the adjacent text field!
European
Mark of conformity Confirms that the device complies with European
Community guidelines.
Protection class I Product with basic insulation and free (touchable)
conductive parts, which have additional earthing.