U45W Blue Jay
User Manual
13
CALIBRATION INSTRUCTION
TAKEOFF METHODS
Always calibrate your drone with your transmitter before flying, and recalibrate after takeoff if you
experience difficult operation.
1. Turn off the drone and transmitter.
2. Turn on the transmitter; push the left stick all the way up, then all the way down (Fig. 9, 10). The
transmitter is now paired.
1.
Method 1 (Start):
Make the two sticks “toe in” to start the motor (Fig. 12), then push the throttle
stick up and release, and the drone will take off.
2.
Method 2 (1-Key Lift):
Press the Lift/Land/Emergency Shutdown button, and the drone will
slowly rise to a height of 1 meter (Fig. 13).
FIGURE 9
FIGURE 12
FIGURE 13
FIGURE 11
FIGURE 10
FUNCTIONS
3. Place the drone on a flat surface facing away from you and turn it on – three beeps and unblinking
lights indicate successful pairing.
4. DO NOT move the left stick before calibration. Push the right stick to the bottom right (Fig. 11);
drone lights will flash to indicate the drone is pairing. When the drone lights stay on the drone is
ready to fly.