FORCE1 RC
10
TRANSMITTER BATTERY INSTALLATION
ATTACHING MOBILE PHONE TO TRANSMITTER
PREFLIGHT CHECKLIST
1. Press the self-locking switch on the top right side of the phone clip and push the holder to a fully
open position
(Fig. 2)
.
2. Place the phone facing front, pull the phone clip down, and press tightly as possible to secure the
phone and transmitter
(Fig. 3)
.
3. Insert the lens hood into the slot and make sure the lower edge of the lens hood is as close to the
phone as possible
(Fig. 4)
.
1. Fly in an open area and abide by all local and federal guidelines. Check the FAA’s B4UFLY mobile
app for up-to-date drone flight info.
2. Make sure your drone and transmitter batteries are fully charged.
3. Put the left stick of the transmitter in the middle position.
4. Follow power off/on instructions closely. Always turn ON your transmitter first before flying, and
turn OFF the drone first when you’re finished.
5. Make sure the connection is solid between your battery and motor; vibration may cause loosening.
FIGURE 2
FIGURE 1
FIGURE 3
FIGURE 4
Open the battery cover and insert 4 AA batteries as shown in Figure 1 (not included).
• The transmitter needs 4 AA batteries to work
• Insert batteries in correct polarity (+) and (-)
• Don’t mix old and new batteries
• Don’t mix alkaline, standard (carbon-zinc) and
rechargeable (nickel-cadmium) batteries
• Remove rechargeable batteries before charging
• Only charge batteries under adult supervision
• Remove spent batteries from the transmitter
• Regularly inspect the charging cable, cord, plug, enclose
and other parts; if you notice damage, please visit
Force1rc.com for a replacement, or email us at support@
force1rc.com
CAUTION:
