28
Install the S4810
identification of the management unit and unit IDs by methodically supplying power to the units in your
preferred sequence.
Similarly, when you add a new unit to the stack, the unit will be gracefully added as Unit
last
(the lowest
unused number) with the current configuration. Attaching a new unit may cause each unit in the stack to
reload, and the subsequent configuration file in each unit includes the awareness of the new unit.
If you have a pre-configured unit that you want to add to the stack, but you want to make sure that the
configuration does not override the configuration of the stack, it is best to add the unit while it is powered
down, in order to avoid stack management conflicts.
For details on removing a unit from a stack and other stacking commands, see the Stacking chapter in the
S4810 FTOS Configuration Guide
and the Stacking Commands chapter in the
S4810 FTOS Command
Reference.