FOR-A IVS-200, Operation Manual

Page: 48 / 64

48
8-3-4. MOTION DETECT AREA
Click MOTION DETECT AREA in the STABILIZE menu to open the MOTION DETECT AREA
menu as shown below.
Item Setting Description Reference
(1) MARKER
Allows you to select whether to display an
MOTION DETECT AREA selection marker on
video output.
[Setting range]
ON, OFF
[Default value]
OFF
5-4-4
(2) START(H)
(3) END(H)
Allows you to set the horizontal extent of the
motion detection area.
[Setting range]
START(H): 18 to 310
END(H): 50 to 342
[Default value]
START(H): 26
END(H): 334
* Odd values cannot be set. If an odd value is
entered, the value will be adjusted to the entered
value minus 1.
(4) START(V)
(5) END(V)
Allows you to set the vertical extent of the motion
detection area.
[Setting range]
START(V): 12 to 197(NTSC)
14 to 239(PAL)
END(V): 44 to 229(NTSC)
46 to 271(PAL)
[Default value]
START: 24
END: 216 (NTSC) / 260 (PAL)
(6) OK
Applies the settings to the IVS-200.
－
(7) MAIN MENU
Returns to the MAIN menu.
8-3-1
(8) STABILIZE Returns to the STABILIZE menu. 8-3-2