10
2. Panel Descriptions
2-1. Front Panel
(1) Power LED
Lights up green when the unit is turned on.
Apply AC power to DC12V IN on the rear panel to turn on the unit.
(2) OPERATE / BY-PASS toggle switch
OPERATE (down) : Corrects for shaking and outputs corrected signals.
BY-PASS (up) : Does not correct for shaking. Input signals are output without correction.
See section 6 “OPERATE / BY-PASS” for details
(3) Menu LED
Lights up green when IVS-200 is in menu mode.
(4) Menu Control knob
Used to enter menu mode or change parameters.
Hold down the menu control knob at least 2 seconds to enter menu mode.
Turn the knob to change parameters, and press it to confirm the change while watching the
menu that is displayed on screen.
BY-PASS
POWER
OPERATE
MENU
(PUSH)
I V S - 2 0 0
V I D E O S T A B I L I Z E R
(1) (2)
(3)
(4)
