B.- Audio: for changing the general output volume on the selected receiver.
C.- E/S: for modifying the default state of the output relays/relés and the activation condition of the
input sensors.
i.- Relays in standby/relés en estado de reposo: for selecting the relays in standby state/estado
de reposo.
N.Open/abierto: in standby the terminals NO and 0 stay together.
N.Closed/cerrado: in standby the terminals NC and 0 stay together.
ii.- Sensor activation/activación de sensores: for selecting the condition to activate an event under.
C.Closed/cerrado: the event will be activated if the sensor detects circuit closure.
C.Open/abierto: the event will be activated if the sensor detects an opening in the circuit.
D.- Options/opciones: for remotely upgrading/actualizar or restarting/reiniciar the selected
AIP-3010
receiver.
8.- Find in the map: for finding the selected receiver if it is within any area image.
Note:
these options are also available pressing the right-hand button on the mouse over the receiver in the
list of devices.
- 7 -
EN
AIP-3010_MANUAL_(EN)_20170529_Maquetación 1 29/5/17 9:35 Página 7
