FONA XPan 3D Operating Instructions
69 683 70110
- 150831
11/28
5.
Application Software
5.1 OrisWin DG Suite
The software OrisWin DG Suite allow the acquisition of both panoramic X-ray images and X-Ray images for
3D reconstruction, managing also the associated patient data records.
The images acquired by OrisWin DG Suite can be saved in DICOM format.
For more information on the use of the application, refer to the OrisWin DG Suite user manual.
The image acquisition procedures are described below; the instructions for subsequent processing and
storage of the images are described in the OrisWin DG Suite User Manual
A.
Starting
On the PC connected to FONA XPan 3D with OrisWin DG Suite
installed:
Start OrisWin DG Suite and select the Patient
module with the relevant button
B.
Selecting the patient
Select the patient from the list or insert a
new patient.
Then start image management.
C.
Selecting the X-ray system
Start an acquisition session by selecting the
TAC button.
D.
Software Acquisition Interface
The two high bars on acquisition module can be:
Red: system is not connected to PC
Yellow: system proper connected to PC, but not ready to
acquire
Green: system ready to acquire
Blue: system is acquiring (X-Ray ON).
Click on “P” button to select the program and the
button
for the patient size
If needed, kV and mA values can be increased or decreased
through the + and - buttons
