Service Manual
båÖäáëÜ
cê~å´~áë
67
4.16
Replacing fuses
4.16.1
Replacing mains fuses
✔
The unit is switched off and the power cable is disconnected.
1. Pull out the fuse holder.
2. Replace both fuses.
3. Reinsert the fuse holder into the intake sleeve.
4.16.2
Replacing the heater fuse
✔
The unit is switched off and the power cable is disconnected.
1. Open the bayonet catch of the fuse holder.
2. Replace the fuse.
3. Insert the fuse holder and lock it.
Summary of Contents for MyCrown Design
