Service Manual
båÖäáëÜ
cê~å´~áë
43
Removing the cover and connection board
1. Remove the back cover. The cover can remain hanging on the
device.
NOTICE! Do not subject the cables to any tension.
2. Remove the connection board with camera connection and Wi-Fi
antennas. The connection board can remain hanging on the device.
NOTICE! Do not subject the cables to any tension.
Removing the PC module
1. Remove the power supply cable for the display and both other cables,
which are labeled with arrows in the illustration.
2. Remove the 5 screws from the PC module.
Summary of Contents for MyCrown Design
