Service Manual
båÖäáëÜ
cê~å´~áë
39
Removing the handles
1. Remove the screws on the handles.
2. Remove the handles.
Attaching the handles
➢ Screw on the handles.
Mounting the back panel
1. Reinsert the ground cable and reestablish the link to the button
connection.
2. NOTICE! Do not jam in the ground cable or button connection.
Carefully place the rear panel back on.
3. Fasten the back panel securely with 6 screws.
Summary of Contents for MyCrown Design
