Service Manual
båÖäáëÜ
cê~å´~áë
45
Installing the PC module
1. Mount the display into the chassis from above.
2. Connect all cables to the underside of the PC module:
1x DVI cable
5x USB cable
2x LAN cable (camera connection and network connection)
2x cable for Wi-Fi antennas (fasten with 8 mm open-ended spanner.)
3. Tip the PC module completely into the chassis.
Summary of Contents for MyCrown Design
