H300P Temperature Humidity Chamber
Page 10
Changing Temperature Units
To change the temperature controller units follow the procedure below:
•
Press the Forward Arrow key once. The PM Plus controller will display a menu.
•
Press the
–
key until
Setup
is highlighted.
•
Press the Forward Arrow key once. The PM Plus controller will show the Setup Menu.
•
Press the Forward Arrow key until
Global
is highlighted.
•
Press the Forward Arrow key once.
Display Units
should be highlighted.
•
Press the Forward Arrow key once.
•
Press the
+
or
–
keys to select the desired units (F or C).
•
Press the Home key when done.
Changing the Set Point
To change the target set point, use the numeric slider or the
+
or
–
keys until the desired set point is
reached. The controller has a 3 second delay before a new set point becomes active.
Turning Temperature or Humidity Control OFF
To turn control off to both temperature and humidity, use the
CONT
button on the chamber Controls. You
can also turn off control to either temperature or humidity individually using the appropriate PM PLUS
controller, as follows:
•
Press the Forward Arrow key once.
Control Mode 1
should be highlighted.
•
Press the Forward Arrow key once.
•
Press the
+
or
–
keys until
Off
is highlighted.
