45
OPERATION
INFEED the GRINDING HEAD
up until there is
minimal clearance between the reel blade and the
GRINDING WHEEL.
Reset the TRAVERSE TRAVEL LIMITS so the
GRINDING WHEEL
clears the reel at both ends
by approximately 1/16" [1.5 mm]. Move the
GRINDING HEAD
to the right side
TRAVEL LIMIT
and lock the BELT CLAMP.
Verify the SPIN DRIVE MOTOR position and the
number of blades on the reel.
CHOOSE SPIN MOTOR LOCATION
EDGE OF BLADE
INDEX FINGER
FIXED FINGER
WHEEL
TRAVEL LIMITS
SELECT SPIN DRIVE POSITION
SET TRAVEL LIMITS
FIG. 71
FIG. 72
FIG. 73
FIG. 74