26
OPERATION
FRONT ELECTRIC BOOM LOADING
ELECTRIC BOOM OPTION WITH
OPTIONAL REAR DOORS
OPTIONAL WORKSTATION
There are 2 optional pieces of equipment that can
be purchased to load a cutting unit. Before starting,
read and understand all safety information in
this manual and the manual that came with your
equipment. Safety information for loading and
operational instructions have been included on the
following pages.
OPTIONAL BOOM WITH ELECTRIC WINCH
The cutting unit can be loaded from the front or rear
of the machine with the optional boom attachment.
(653 must have Rear Door Option in order to load
from the rear).
1. Position the reel on the floor so the front of the
mower faces in the same direction as the front of
the machine.
2. Hook the winch spreader bar onto the reel (the
clamps on the spreader bar should be spaced evenly
along the mower, so they do not slide as the mower
is being raised).
3. Use the control connected to the winch to raise or
lower the cutting unit. To lower press the "DOWN"
button. To raise press the "UP" button.
OPTIONAL WORKSTATION
The Workstation can be used to load from the rear
on both the ACCU-Master and the ACCU-Pro.
For detailed information on the OPTIONAL
WORKSTATION, see the manual included with the
Workstation.
FIG. 27
FIG. 28
FIG. 29