44
Appendix
11.4
Shutdown checklist
11.5
Checking components for compliance with national regula-
tions
All electrical components must be checked regularly for electrical safety in accordance with the
intervals and test methods defined in the national regulations.
If any faults or damage are detected during the inspection, the faulty components have to be
replaced before the automatic feeder can be used again.
Shutdown
OK?
Clean the suction hose.
Shut down teat cleaning.
The registration of the HygieneBox must be canceled in the setup for the automatic
feeder.
Disconnect and dispose of the teat.
Open the housing of the HygieneBox.
Remove the suction hose and return hose and dispose of them.
Close the housing.
Pull off the antenna cables and cap the connections with plugs.
Clean the discharge tray.
Externally clean the HygieneBox.
