Original User Guide | Groove Go Pedelec Version 2
EN-47
WARNING
Keep battery chargers away from sparks and fires. It can explode
causing severe burns and fires. Further consequences can include
malfunctions and a reduced service life. Ensure there is adequate
ventilation for charging.
IMPORTANT
The mains voltage must match the supply voltage of the battery
charger, otherwise there is a risk of damage to the device. The supply
voltage for the charger is specified on the label on the back of the
device.
Do not charge batteries for a long period if they are already fully
charged or are not being used. Electrical storms, voltage fluctuations
and short circuits can damage the battery.
Keep the battery charger clean. If the contacts are dirty, the dirt can
burn during charging, leaving burn marks. The charger may need to be
replaced in such cases
8.4.1 Cleaning Page EN-48
.
8.2
Technical details
Battery voltage
36 V
AC input voltage
100 - 240 V
Frequency
50 – 60 Hz
Max. DC output voltage
42 V
Max. charge current
2 A
Dimensions ( L I W I H)
160 mm I 70 mm I 46 mm (charger)
Permissible ambient tem-
perature when charging
0 °C to +40 °C
Storage temperature
-10 to +50 °C
Recommended storage tem-
perature
18 to 23 °C
Weight
706 g (charger)
Protection class
The charger is only intended for interior
use. Keep the charger away from rain and
moisture. If water gets into the charger there
is a risk of electric shock.
