background image

EN-36  

  

Original User Guide | Groove Go Pedelec Version 2

5.   Pull the battery parallel to the seat tube and pull out of the docking 

station upwards with a jerk.

For 5. Remove battery from docking station

Pedelec Compact

For 5. Remove battery from docking station

Pedelec MTB

IMPORTANT

 

Hold the battery tight so it does not fall. It can be damaged if you 
drop it.

The recommendation is to remove the key now and keep it in a safe 
place so it does not break off and is not lost.

If you are having difficulty pulling the battery out of the 
docking station, you can also stand in front of the handle 
bars against the direction of travel and remove the battery 
from there. The pulling direction in this position is optimal. 
You also have more strength in your hands. If you are still 
unable to remove the battery, please contact your cycle 
dealer.

Seat tube battery 

Pedelec Compact

1.   Put the key into the lock and turn 

anticlockwise. The battery is 
unlocked.

Pedelec Compact and Pedelec MTB

2.   Stand next to the pedelec.

3.   Use your upper body to lean against the saddle.

4.   Grip the battery with both hands. Pedelec MTB: At the same time move 

the locking slider towards the front wheel.

For 1. Unlocking the battery

Pedelec Compact

Summary of Contents for PEDELEC Groove Go






















































Reviews: