EN-34
Original User Guide | Groove Go Pedelec Version 2
5.4
Switching on the pedelec
Do not switch on the pedelec when you are riding.
Otherwise the motor can stop and you will not be provided
with the full assist level.
1. Press the battery button for one second.
a)
The assist mode is displayed.
All LEDs on the display panel light up blue. The assist level is 100%.
b)
After four seconds, the battery charge level
5.6 Battery charge level
Page EN-35
is displayed automatically. The LEDs now light up green.
a) Display of assist mode
b) Display of battery charge level
Battery button
5.5
Changing assist mode
1. If the LEDs on the battery display panel light up green, press the
battery button for one second. The LEDs now light up blue and display
an assist mode.
Display of battery charge level
Display of assist mode
BRIEFLY PRESS THE
BATTERY BUTTON
2. If the LEDs on the battery display panel light up blue, you can change
the assist mode by briefly pressing the battery button. The number
of LEDs which are illuminated blue gives information on how much
assistance the motor is providing.
Display
Assist
Power consumption
¢¢¢¢¢
Five LEDs light up
100%: Full assist by
the motor.
High
¢¢¢¥¥
Three LEDs light up
70%: Reduced assist
for greater range.
Medium
¢¥¥¥¥
One LED lights up
0%: No assist
Very low
The sequence of the assist modes is predetermined. At first,
five LEDs (
¢¢¢¢¢
) light up, then three LEDs
(
¢¢¢¥¥
) and then one LED (
¢¥¥¥¥
). Then the display
starts again from the beginning - with five blue illuminated
LEDs.
3. Assist starts working as soon as you start pedalling. Assist cuts out as
soon as you stop pedalling or when you have reached a speed of 25
km/h.
