Original User Guide | Groove Go Pedelec Version 2
EN-35
5.7
Switching off the pedelec
1. Press the battery button for four seconds.
If the pedelec remains stationary for about 10 minutes the
pedelec switches itself off. To prevent a total discharge,
the battery management system (BMS) switches the
battery to Sleep mode. The battery reverts to sleep mode
independently after 10 minutes and is reawakened by
pressing the battery button.
5.8
Unlocking and removing the battery
Down tube battery
1. Put the key into the lock and turn
anticlockwise. The battery is
unlocked.
2. Stand next to the bike against the
direction of travel.
3. Grip the battery with both hands.
4. Pull the battery parallel to the down
tube and pull out of the docking
station with a jerk.
For 1. Unlocking the battery
For 2. Remove battery from docking station
5.6
Battery charge level
1. If the LEDs on the battery display panel light up blue, please wait for a
short period. After a few seconds the LEDs light up green and display
the battery charge level.
Display of assist mode
Display of battery charge level
WAIT 4 SECONDS
2. If the LEDs on the battery display panel light up green, the number of
LEDs which are illuminated green give information on how much the
battery is charged.
Display
Description
Battery charge level
¢¢¢¢¢
Five LEDs light up
100 – 81 %
¢¢¢¢
Four LEDs light up
80 – 61 %
¢¢¢
Three LEDs light up
60 – 41 %
¢¢
Two LEDs light up
40 – 21 %
¢
One LED lights up
20 – 11 %
¥
One LED flashes
10 – 0 %
The value displayed can change quickly when the
circumstances change, such as when riding up an incline
after a long, flat stretch.
