MX-4 U
SER
G
UIDE
C
HAPTER
13
126
To set up your Macintosh computer to communicate with the MX-4 (Static IP address):
Macintosh OS 10.2.8/OS 10.3.6
1
Plug in the straight cable (R5) to the MX-4 Ethernet port and your computer’s Ethernet port.
NOTE
A
straight cable
has the same wire configuration colors on each end.
A
crossover cable
has two different wire configuration colors on each end.
Make sure to use a
crossover
cable
if you are working with a Macintosh computer.
2
Access
System Preferences
on the desktop using the
Apple Logo
in the right-hand corner of
the screen.
3
Click the Network icon in System Preferences to access the Network page.
4
In the Network page, change the Configure IPv4 field to
Manually
.
The network page should show an IP address of 0.0.0.0.
5
Apply a universal static IP address (192.168.1.4) to allow communication with the mixer
(192.168.1.3).
For example, if the mixer displays 192.168.1.3, the IP address entered on the Macintosh
should be 192.168.1.4.
6
Access your Internet browser. It should display the following:
Summary of Contents for MX-4
