FMT Swiss AG mobiSERVE, Operating Instructions And Safety Notes

Page: 24 / 32

24
GB
Operating instructions - mobiSERVE
13. Maintenance
CAUTION
■ ■
Prior to maintenance work on the electric system of the mobiSERVE,
disconnect the unit from the voltage source by means of the battery cut-
off switch.
■ ■
Wear protective gloves when performing maintenance work on the
electric system.
■ ■
For all maintenance and service work, the mains plug for charging the
battery must be disconnected from the device.
■ ■
Maintenance work on the electric system may be only done by
authorized and qualified personnel.
WARNING
Risk of injury when removing the lead-acid battery.
■ ■
The battery may only be removed from the mobiSERVE by a sufficiently
trained and instructed personnel.
■ ■
Keep to the battery manufacturer's instructions when transporting the
battery!
14. Repair/Service
The mobiSERVE was developed and produced according to the highest quality standards.
Should a problem develop, despite of all quality controls, please contact our customer service:
FMT Swiss AG
Tel +49 9462 17-216
Fax +49 9462 1063
service@fmtag.ch
15. Disposal
The operating company is responsible for the proper disposal of the mobiSERVE.
Hereby, the industry-specific and local regulations must be observed when disposing of the diffe-
rent materials.
Only qualified personnel is authorized to disassemble and dispose of the mobiSERVE.
WARNING
For removing the lead-acid battery from the housing, the following
steps must be carried out successively:
■ ■
Disconnect the battery from the electric components by means of the
battery cut-off switch.
■ ■
Disconnect the black terminal from the negative pole of the battery and
remove it.
■ ■
Put the black protective cap on the negative pole of the battery.
■ ■
Disconnect the red terminal from the positive pole of the battery and
remove it.
■ ■
Put the red protective cap on the positive pole of the battery.
■ ■
Loosen the battery mount and take the battery out of the housing.