18
US
Operating instructions - digital oval gear meter and pulse meter
4
FILL LIQUID INTO CAL VESSEL
Start simulated operation, but do not press any buttons
yet.
Simulated operation may be interrupted and continued
as necessary. Continue filling the vessel until full mark is
reached. It is not necessary to top out at any specific value.
Set value
Actual value
5
PRESS RESET SHORTLY
This is how the meter ‚knows‘ that sim op for calibration is
complete. Make sure cal vessel has really been filled up to
full mark before you do this.
For calibration you must correct the count indicated by
the partial volume register (ex.: 9,800), entering the actual
value, i.e. the volume of the cal vessel. An arrow at the
bottom left of the display (pointing up or down) indicates
the direction in which USER K FACTOR is changed. Increase
or decrease when actions 6 or 7 are carried out.
6
PRESS RESET SHORTLY
Direction of arrow flips. This may be repeated as often as
necessary.
7
PRESS TOTAL SHORTLY / SEVERAL SECS
Value indicated will change as indicated by arrow
■
■
One increment per each time TOTAL is pressed.
■
■
Continuous if the TOTAL button is held down, the first 5
increments slow, then fast.
■
■
If you overshoot, go back to point 6 and repeat (6).
