22
US
Operating instructions - digital oval gear meter and pulse meter
Every time you (shortly) press RESET, one of the other combinations of units will be displayed one after the
other (see figs.):
Press TOTAL for several seconds to store the new combination. The meter will re- start and is then ready for
operation using the newly selected combination of units.
NOTE
The registers of the resettable and absolute total amounts are automatically set to
the new measuring units.
When the measuring unit is modified, a new calibration is NOT required.
10. Maintenance
This oval gear meter has been designed for minimum maintenance requirements. What remains to be
done from time to time:
■
■
Exchange the batteries when discharged.
■
■
Clean the measuring chamber. This may be necessary from time to time depending on the specific
liquid(s) being measured and/or when foreign matter gets into the chamber (inlet filter not sufficient).
10.1 Exchanging batteries
The meter is supplied complete with two 1.5 V alkaline batteries (1N).
The meter has a two-step low battery indicator:
1) As soon as the batteries dip below the first charge level the battery icon in the display will light up.
The meter will continue to operate correctly, but the user is informed that the batteries should be
exchanged as soon as possible.
2) If the batteries are not exchanged, the battery will sooner or later reach the second alarm level.
Normal operation is no longer possible. At this state, the battery icon will flash, being the only thing
that is still visible in the display.
