FMS EMGZ621A, Operating Manual, Page: 7 / 40

Operating Manual EMGZ621A
7
fig. 2: Block diagram of the electronic unit EMGZ621A E621A010e
5 Quick Installation Guide
•
Check all your requirements such as:
– configuration of the analogue inputs (power supply, 4 wire or 6 wire circuit)?
– configuration of the analogue outputs (signal level)?
– gain switching required?
– linking by interface etc.?
•
Draw your final wiring diagram according to the wiring diagram (refer to „7.2 Wiring
diagram“)
•
Install and wire all your components (refer to „7. Installation and wiring“)
•
Parametrize and calibrate the measuring amplifier for each channel (refer to
„8. Operating“)
•
Put system into operation; proceed a test run with low speed
•
If required, do additional settings (refer to „8.4 Additional settings“)