FMS EMGZ621A, Operating Manual, Page: 19 / 40

Operating Manual EMGZ621A
19
9.2 List of the system parameters
Parameter Unit Min Max Default Selected
Language English, French, Italian, German
Measuring System Metric, US standard Metric
Lowpass display [Hz] 0.1 10.0 1.0
Identifier [-] 0 255 0
Baud rate 2400, 4800, 9600, 19200 9600
9.3 List of the parameters EMGZ621A
Parameter Unit Min Max Default Selected
Offset A [Digit] –8000 8000 0
Gain A [-] 0.100 9.000 1.000
Gain 1 A [-] 0.100 9.000 1.000
Offset B [Digit] –8000 8000 0
Gain B [-] 0.100 9.000 1.000
Gain 1 B [-] 0.100 9.000 1.000
Force of sensor [N, kN, cN] 1 9999 1000
Unit of sensor N, kN, cN N
Sensitivity [mV/V] 0.1 3.0 1.8
Min. limit
1) 2)
0
Max. limit
1) 2)
0
|A–B| > limit
1) 2)
-
Lowpass output 1 (A–B) [Hz] 0.1 200.0 10.0
Scale output 1 (A–B)
1) 2)
-
Config. output 1 (A–B) 0...20mA, 4...20mA 0...20mA
Lowpass output 2 (A+B) [Hz] 0.1 200.0 10.0
Scale output 2 (A+B)
1) 2)
-
Config. output 2 (A+B) 0...20mA, 4...20mA 0...20mA
Lowpass output 3 (A) [Hz] 0.1 200.0 10.0
Scale output 3 (A)
1) 2)
-
Config. output 3 (A) 0...20mA, 4...20mA 0...20mA
Lowpass output 4 (B) [Hz] 0.1 200.0 10.0
Scale output 4 (B)
1) 2)
-
Config. output 4 (B) 0...20mA, 4...20mA 0...20mA
1)
[N, cN, kN] if measuring system = metric
[lb, clb, klb] if measuring system = US standard
2)
A force value can be input. The value consists of 4 digits. The
position of the decimal point depends on the parameter
Force of sensor