Operating Manual EMGZ 321.EIP
19.10.2017
42
Subnet Mask Address
LCD:
Subnet
Use:
The parameter assigns the Subnet Mask of the amplifier in the
Ethernet network. This enables the user to communicate via a web
browser with the amplifier. The Subnet Mask must be entered in 4
separate blocks (Sub. Bl 1; Sub. Bl 2; Sub. Bl 3; and Sub. Bl 4).
Unit
Parameter Range
Selection
Default
Min
Max
-
000.000
000.000
255.255.
255.255
-
255.255.
255.000
LAN Speed
LCD:
LANSpeed
Use:
LANSpeed
determines the data speed of the tension controller to
communicate with the receiver (Switch, Hub or PC).
Unit
Parameter Range
Selection
Default
Min
Max
MBPS -
-
100
10
100
Default Settings
LCD:
Default
Use:
This menu point is a command. It resets the parameters to the factory
settings. If
Not Set
is chosen, all parameters stay as set by the user. If
Yes
is chosen, the default parameters are loaded.
Unit
Parameter Range
Selection
Default
Min
Max
- - -
Not set
Yes
Not set
System Information
LCD:
System Info
Use: The
System Info
parameter contains all relevant device information to
identify the product. It is used for service purpose. Please make sure
that you have this information ready when you call the FMS service
department.
Unit
Parameter Range
Selection
Remarks
Min
Max
- - -
Device
Version
SerialNo
Type number of device.
Software version used in this device.
FMS unique serial number.
