FMS CMGZ433 Series, Operating Manual

Page: 27 / 45

Operating Manual CMGZ433
27
10.2 Command list
command answer purpose
DAKT<CR> XXXXXX<CR> read actual diameter
DIFF<CR> DIFY<CR> / DIFN<CR> read alarm control error
DIFR<CR> DIFRXXXX.X<CR> actual control error in %
ERR?<CR> XX<CR> read actual erros
Pos.1...2 : Err1...Err2
Value of Pos. = 0 : No Err;
Value of Pos. = 1 : Err active
FREI<CR> PACC<CR> / FAIL<CR> enable controller
IDNT<CR> CMGZ433 V2.01 1098 10 characters type, fix
< Typ > <Version> <S > 10 characters version, fix
4 characters serial number, fix
INRS<CR> PACC<CR> / FAIL<CR> initialize interface (for ex. after
loading of new interface
parameters)
LOCK<CR> PACC<CR> / FAIL<CR> disable conbtroller
REMR<CR> PACC<CR> / FAIL<CR> turn off remote mode
(enabling of the keys on
the operating panel)
REMS<CR> PACC<CR> / FAIL<CR> turn on remote mode
(disabling of the keys on
the operating panel)
SOLLXXXXXXX<CR> PACC<CR> / FAIL<CR> write new tension reference value
into RAM (The new reference will
be lost while power-off or
changing a parameter.)
SRMP<CR> XXXXXX<CR> read actual tension reference value
STEL<CR> XXXX.X<CR> read actual output value
SWRTXXXXXXX<CR> PACC<CR> / FAIL<CR> write new tension reference value
into EEPROM
STAR<CR> XXXXXXXXXXXXXXXXXX<CR> general status information
1-6 : feedback
7-11 : output value
12-16: reference after ramp
17 : error evaluation
18 : control error
VALS<CR> XXXXXX<CR> read feedback value
10.3 Read parameter
command answer purpose
RP01<CR> XXXXX<CR> offset feedback
RP02<CR> X.XXX<CR> gain feedback
RP03<CR> XXXX<CR> sensor, nominal force
RP04<CR> X<CR> sensor, force unit
RP05<CR> X.X<CR> sensor, sensitivity
RP06<CR> X<CR> number of sensors
RP07<CR> XXX.X<CR> lowpass, feedback
RP08<CR> XX.X<CR> lowpass, instrument
RP09<CR> XX.X<CR> lowpass, display
RP10<CR> XX.XX<CR> scale of instrument
RP11<CR> X<CR> limit 1 min / max
RP12<CR> XXXXX<CR> limit value 1
RP13<CR> X<CR> limit 2 min / max
RP14<CR> XXXXX<CR> limit value 2