www.fmiproducts.com
119303-01G
4
SAFETY
Continued
11. Do not run fireplace
• where flammable liquids or vapors are
used or stored
• under dusty conditions
12. Do not use this fireplace to cook food or
burn paper or other objects.
13. Do not use fireplace if any part has been
exposed to or under water. Immediately
call a qualified service technician to in
-
spect the fireplace and to replace any part
of the control system and any gas control
which has been under water.
14. Do not operate fireplace if any log is
broken. Do not operate fireplace if a log
is chipped (dime-sized or larger).
15. Turn fireplace off and let cool before
servicing. Only a qualified service person
should service and repair fireplace.
16. Operating fireplace above elevations of
4,500 feet could cause pilot outage.
17. To prevent performance problems in
propane/LP units, do not use propane/LP
fuel tanks of less than 100 lbs. capacity
(propane/LP units only).
18. Provide adequate clearances around air
openings.
State of Massachusetts:
The installation
must be made by a licensed plumber or
gas fitter in the Commonwealth of Mas
-
sachusetts.
Sellers of unvented propane or natural
gas-fired supplemental room heaters shall
provide to each purchaser a copy of 527
CMR 30 upon sale of the unit.
Vent-free gas products are prohibited for
bedroom and bathroom installation in the
Commonwealth of Massachusetts.
LOCAL CODES
Install and use fireplace with care. Follow all
local codes. In the absence of local codes,
use the latest edition of
The National Fuel
Gas Code ANSI Z223.1/NFPA 54
*.
*Available from:
American National Standards Institute, Inc.
1430 Broadway
New York, NY 10018
National Fire Protection Association, Inc.
Batterymarch Park
Quincy, MA 02269
Note: Where listed vented decorative logs
are required, thermostat operation is not
permitted.
4. This fireplace shall not be installed in a
bedroom or bathroom.
5. Do not use this fireplace as a wood-burn
-
ing fireplace. Use only the logs provided
with the fireplace.
6. Do not add extra logs or ornaments such
as pine cones, vermiculite or rock wool.
Using these added items can cause soot-
ing. Do not add lava rock around base.
Rock and debris could fall into the control
area of fireplace.
7. This fireplace is designed to be smoke
-
less. If logs ever appear to smoke, turn
off fireplace and call a qualified service
person.
Note: During initial operation,
slight smoking could occur due to log cur-
ing and fireplace burning manufacturing
residues.
8. To prevent the creation of soot, follow the
instructions in
Cleaning
, page 21.
9. Before using furniture polish, wax, carpet
cleaner or similar products, turn heater off. If
heated, the vapors from these products may
create a white powder residue within burner
box or on adjacent walls or furniture.
10. This fireplace needs fresh air ventilation to
run properly. This fireplace has an Oxygen
Depletion Sensing (ODS) safety shutoff
system. The ODS shuts down the fire
-
place if enough fresh air is not available.
See
Air for Combustion and Ventilation
,
page 6. If fireplace keeps shutting off, see
Troubleshooting
, page 23.
