www.fmiproducts.com
112127-01E
18
INSTALLATION
Continued
INSTALLING LOGS, LAVA ROCK,
AND GLOWING EMBERS
WARNING: Failure to posi
-
tion the parts in accordance
with these diagrams or failure
to use only parts specifically ap
-
proved with this burner system
may result in property damage
or personal injury.
It is very important to install these logs ex-
actly as instructed in Figures 26 through 30.
Do not modify logs. Only use logs supplied
with freestanding burner system. Do not use
if any log(s) are broken (see
Replacement
Parts
, page 29).
1. Remove glass door. See
Removing/Re-
placing Glass Door,
page 17.
2. Place log #1 (back log) on top of grate.
Make sure notches in the bottom of log fit
over the grate (see Figure 24).
3. Rest log #2 (large front log) on the pins
on the front part of grate (see Figure 25).
4. Place log #3 (crossover log) onto rear and
front logs. Make sure it is seated properly
into notch on front log and over the raised
triangular portion of rear log as shown in
Figure 26.
5. Place log #4 (small log) onto front left part
of grate making sure the notches fits over
the prong of the grate. See Figure 27.
Figure 24 - Installing Log No. 1
1
Figure 25 - Installing Log No. 2
2
Figure 26 - Installing Log No. 3
3
Figure 27 - Installing Log No. 4
4
