www.fmiproducts.com
112127-01E
2
SAFETY
WARNING: Improper instal
-
lation, adjustment, alteration,
service or maintenance can
cause injury or property damage.
Refer to this manual for correct
installation and operational
procedures. For assistance or
additional information consult
a qualified installer, service
agency or the gas supplier.
This appliance may be installed
in an aftermarket,* permanently
located, manufactured (mobile)
home, where not prohibited by
local codes.
This appliance is only for use
with the type of gas indicated on
the rating plate. This appliance
is not convertible for use with
other gases, unless a certified
kit is used.
* Aftermarket: Completion of sale, not for pur-
pose of resale, from the manufacturer
State of Massachusetts: The
installation must be made by a
licensed plumber or gas fitter
in the Commonwealth of Mas-
sachusetts.
WARNING: This product con
-
tains and/or generates chemicals
known to the State of California
to cause cancer or birth defects
or other reproductive harm.
IMPORTANT: Read this owner’s
manual carefully and completely
before trying to assemble, oper
-
ate or service this stove with
burner system. Improper use of
this stove with burner system
can cause serious injury or
death from burns, fire, explo
-
sion, electrical shock and carbon
monoxide poisoning.
DANGER: Carbon monoxide
poisoning may lead to death!
This stove complies with the National Safety
Standards and is listed and tested by PFS
Corporation to
ANSI Z21.50
standard as
vented gas stove.
NOTICE: Decorative product not
for use as a heating appliance.
This stove with burner system is a vented
product. This stove with burner system will
not produce any gas leakage into your home
if properly installed. This unit must be properly
seated and sealed. If this unit is not properly
installed by a qualified service person with
glass door properly seated and sealed, gas
leakage can occur.
TABLE OF CONTENTS
Safety .................................................................. 2
Local Codes......................................................... 5
Product Identification
........................................... 5
Product Features ................................................. 6
PreInstallation Preparation .................................. 6
Unpacking............................................................ 7
Venting Installation .............................................. 8
Installation ......................................................... 13
Burner System Assembly .................................. 16
Operation ........................................................... 20
Inspecting Burners..............................................22
Cleaning and Maintenance ................................ 22
Troubleshooting ................................................. 24
Specifications
.................................................... 28
Wiring Diagram .................................................. 28
Service Hints ..................................................... 28
Technical Service............................................... 28
Replacement Parts ............................................ 29
Accessories ....................................................... 29
Parts .................................................................. 30
Warranty ..............................................Back Cover
