www.fmiproducts.com
125566-01A
24
EMBER PLACEMENT - TF SERIES
BURNER SYSTEMS
WARNING: Do not use any
other ember material not sup
-
plied with this unit.
WARNING: Do not operate
unit without ember material
correctly in place as shown in
Figures 27 & 28. Do NOT place
ember material anywhere else
on the unit. Use only ember ma
-
terial supplied with unit. Exces
-
sive or incorrectly placed ember
material may produce carbon
monoxide or soot.
9. Place the right rear top log (#10) on top
of the right rear chunk log (#7) as shown
in Figure 46. Match the rectangular peg
on the top of the right rear chunk log (#7)
with the rectangular hole on the bottom of
the right rear top log (#10).
10. Place the left top log (#11) on top of the
left back top log (#5) and left top forked
log (#6) as shown in Figure 47. Match the
round peg on the top of the left top forked
log (#6) with the round hole on the bottom
of the top left log (#11) and rectangular
peg on the top of the left back top log (#5)
with the rectangular hole on the bottom of
the top left log (#11).
11. Final Assembly is shown in Figure 48.
Figure 46 - Installing Log # 10
Figure 47 - Installing Log # 11
inStallation
Continued
10
11
Figure 48 - Final Assembly
Square
Peg
Round
Peg
