www.fmiproducts.com
125566-01A
25
Figure 50 - Placement of Rock Wool (shown with Platinum Bright Embers)
Figure 49 - Platinum Bright Embers
Flat Front Burner
Ember Material
Rock Wool
1. Two ember materials are supplied with
this log set. Platinum Bright Embers give
a bright glow appearing as hot coals.
Should embers need replacing, see
Parts
,
page 38.
Platinum Bright Ember placement.
Add
embers to front, flat burner. Gently remove
embers from bag. Separate pieces of
ember material and place on surface of
flat burner just behind horizontal ports as
shown in Figure 49.
Rock Wool placement.
Place rock wool
material on front flat burner in areas away
from ports as shown in Figure 50.
2. Add lava rock and small decorative logs
around base of heater if desired.
DO NOT
place rock or additional logs on front
burner or on logs.
Placing any material
on unit other than ember material on front
burner may result in production of carbon
monoxide or soot. Use lava rock to hide
wires from switch/log to control valve.
Place switch/log so the switch is easy to
access.
inStallation
Continued
