21
8.5 LED
8.6 Language
8.7 Auto Power Off
8.8 Radio Frequency Setup
8.9 Stick Calibration
LED Light changes the color of the LED strip located above the power button.
Changing Color:
1. Touch LED Light to enter the menu.
2. Select a color from the list.
3. Touch the icon to return to the previous menu.
Language changes the language for the user interface.
Changing Language:
1. Touch "Language" to enter the menu.
2. Select a language from the list.
3. Touch the icon to return to the previous menu.
Auto Power Off will turn off the transmitter if no receiver is connected and the user has
not done anything for 2 minutes.
To toggle Auto Power Off touch the box to the right of the setting. If there is a check in
the box the function is active.
Radio Frequency Setup contains the RF protocol settings for the transmitter and receiver.
Change RF Protocol:
1. Touch "RF Std. :" and select a protocol from the list.
2. Touch the icon to return to the previous menu.
Update RF:
Update RF updates the internal RF module. The update will be contained within a
firmware update for the NB4. To update touch "Update RF", a progress bar will appear
and after a few seconds the update will complete.
Stick Calibration calibrates the trigger and wheel so that their center and outer positions
are correct. The green bar is the channels current position and the calibrated range will
be grey like the background.
Calibration:
1. Move the wheel and trigger as far as they can go in each direction.
2. Touch the icon to save and return to the previous menu.
