16
6.15 Boat Mode
6.16 Brake Mixing
This function is used only when you are using a model boat. When this function is active,
the throttle channel is set to its lowest position and the brake functionality is disabled.
To toggle this function, select the box beside [Normal mode]. When the function is
active, the text beside the box will change to [Boat mode].
This function enables you to use models that require more than one
braking channel, for example a model that has separate brakes for front
and back braking.
If your model uses extra channels for braking, each channel can be controlled separately
and are slaves of the throttle channel.
Setup:
1. Touch channel 3 or 4 to reveal that channels options.
2. Touch the exponential option to enter the exponential settings.
3. Touch rate and use the + and - iconds to change the percentage and do the same for
Exp.
4. Touch the icon to return to the brake mixing main menu.
5. Touch A.B.S. to enter the sub menu.
6. Refere to the [A.B.S.] section of the user manual for more information on how to set
up A.B.S.
7. Use the Display Servos function to make sure everything is working as expected.
6.17 Mixes
Mixes is used to create a mix between channels.
Setup:
1. Touch a mix to select it.
2. Touch the
icon to enable the function. The icon will change to
when enabled.
3. Touch "Master Channel", then select a master channel from the list.
4. Touch "Slave Channel", then select a slave channel from the list.
6. Repeat step 5 for the other mix as needed.
7. Touch offset, then use the + and - icons to change the slave channels offset relative to
the master.
5. Select [Low side mix] or [High side mix] as needed. Use the +
and - icons to change the mix percentage. Press the icon when
finished to return to the mix menu.
