Flymaster GPS User Manual Download Page 40

Page: 40 / 58

This menu can also be used to disable all the page triggers at once. In order to disable page triggers

the Disable Triggers option should be set to Yes, using the UP, or DOWN keys, and conrmed with the

ENTER Key.

Inverse Titles

Inverse titles allows the user to change the background of the titles as illustrated in Figure

4.29

Figure 4.29: Inverse Titles

The gure of the left shows the normal display and that on the right shows the same display with inverse

titles set to Yes.

4.8.7 Language/Units

The Language and Units menu option allows the user to change the GPS interface language and units. A

short description o the available options for this menu are shown in Table

4.5

The UP, and DOWN keys, can be used to change each eld option. Pushing the ENTER key conrms

the current eld value, and highlights the following eld. Pushing, the MENU key will undo changes.

Table 4.5: Language/Units Menu Options

Function

Description

Language

Denes the interface language.

Alti. Units

Altitude Units. Altitude can be show in Meters, or Feet.

Roc. Units

Rate of Climb Units. ROC can be show in m/s, or 10 x Feet/ min

Dist. Units

Distance units can be in Km, or Miles.

Speed Units

Speed Units can be in Km/h, Miles/h, or Knots.

Temperature

Temperature units can be Celsius or Farenheit.

Coords.

Coordinates format. These can be either:

DD°MM'SS?

DD°MM.mmm'

DD.dddd

UTM

All manuals and user guides at all-guides.com

Summary of Contents for GPS



























































Search results

Summary of Contents for GPS

Reviews:

Related manuals for GPS

Brands by name

Popular brands

Flymaster GPS, User Manual

Search results

Summary of Contents for GPS

Reviews:

Related manuals for GPS

Brands by name

Popular brands